Posted by Most people like to use a Linksys router as it enables them to link multiple computers in the same system. It’s why the router is present in most households. Everyone in a place can gain access to high-speed internet without any interruption. The web interface of Linksys router is its control panel, where users can modify the settings. If you want to change any setting, you’ll have to access the web interface of this router. Those who have just started using this router might wonder how do I log into my Linksys router? In this article, you’ll find how to access Linksys web interface and configure the router settings.
What Are the Requirements to Access the Web Interface of Linksys Router?
It is easy to access the Linksys web interface. Some essential requirements for Linksys router sign-in are as follows:
- Linksys router
- Accessibility to the network either through Wi-Fi or through a LAN cable.
- A web browser
Now that you are aware of the key requirements for making changes to the network, you can follow the various instructions to link to your router’s interface.
The Process for Logging into Your Linksys Router
The process consists of various steps that you need to follow correctly. Keep reading to know how to access the setup page.
1. Make sure that you are well linked to the Linksys router.
If you want to access the Linksys router setup page, you should ensure that you are firmly connected to the network. You can use either a Wi-Fi or an Ethernet wire to get connected to the network. If you’ve forgotten the password of your wireless network, you can try to connect via an Ethernet wire.
2. Open the internet browser and input the IP address.
Proceeding forward, launch your internet browser. Now, input your router’s IP address in the browser’s location bar. Typically, the router’s IP address is 192.168.1.1. If you find this web address not working, search for your current model’s default address. After the page loads completely, you can view a sign-in page on your system’s screen.
3. Input the password and username
You should input your password and username in the relevant sections on this sign-in page. After you enter them correctly, tap ‘Sign in.’ Alternatively, you can also hit Enter. If you aren’t sure of the right password and username, you can see the default password. By knowing how to reset the password, you can input the new password.
You can also find the credentials at your router unit’s backside. After you complete typing in both your password and username, you’ll see another screen opening up before you. You can now configure anything that you want on the system. After you input the admin interface, you can modify the settings of the router.
Once you know how do I log into my Linksys router, you need to configure the router carefully. Any mistake on your part can break the network. It is advised that you write down the current settings before making any modifications. It will help you whenever you want to return to the old settings later.
What Can You Do if the Router Stops to Function After Configuration Change?
Sometimes, it is possible to make mistakes while configuring the settings. The change can break your Linksys home network. But you can handle the problem by following a reset trick. It is called the 30 30 30 hard reset trick. All the routers and modems have a reset button. The button is inside a hole on the back of your router. Its function is to bring back the device to its default configuration. When you perform the 30 30 30 routers reset trick, you can easily reset your router and undo the undesired settings changes.
Steps for performing the 30 30 30 router reset
This trick is relatively easy to follow. You can use this trick as a last resort. Adhere to these steps.
- Firstly, find where the reset button is located. It is generally on the back part of the router inside a hole. At times it can also stick out. If you cannot locate the button, it’s probable that the WPS button on your router functions as the reset button.
- Power on your router. Then press and hold the reset button. You should press and hold it for 30 seconds.
- While you are still holding this button and pressing it, unplug the router’s power. Then, hold the button for half a minute again.
- Keep holding the reset button down and then switch on the power to the router again. Then hold the reset button for another 30 seconds.
After you do this, the router will boot up. It will go back to its factory default settings, and you can access it with these settings. If you aren’t aware of the default settings, you can utilize the search function to locate your router and its default settings. You can also find the username and password. If your router still doesn’t work even after you perform this reset trick, it’s highly likely that it is broken. So, the only option is to purchase a new one.
After resetting the router, reconfigure its settings. You can do so by accessing the Linksys router setup pages. The process for it is mentioned in the previous sections.
Read Also- How to Set up a Wireless Connection to Linksys Router?
Final Words
Now you won’t feel the need to question how do I log into my Linksys router. The steps to access the web interface of this router are quite straightforward. If you face problems at any point or are not able to configure your router, seek Linksys technical support. Our Linksys expert support team is just a phone call away. You can get help whenever the need arises.